KWD Bohemia, s.r.o. – Single-purpose device for robotic glue application

This dedicated device is used to apply adhesive to metal pressed piece for a welding line. The workplace consists of two operator sites and four cells for loading of components. Two loading cells for each operator are present. The operator loads the components into the each cell in the oriented way so that they fit into the base intended for them. After confirmation of loading by the operator, the cell is closed by a security door, the component is fixed by an electromagnet and the cell is ready to be signaled to the robot, which applies the adhesive to the components in the cell in the order of confirmation from the operators. After application of the adhesive, the cell is automatically unlocked and the operator can replace the components with new ones.

No post was found with your current grid settings. You should verify if you have posts inside the current selected post type(s) and if the meta key filter is not too much restrictive.